Simple Solution To Help You Better Understand Plumbing

Simple Solution To Help You Better Understand Plumbing

When it comes to plumbing, you want to make sure that you are getting the best advice available. Use the tips and tricks provided in this article to ensure that you are getting reliable information to use at home and it will not lead to further, unwanted costs down the road.

Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut off valves near where you are working. This will save a great deal of hardship later on.

Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it.

Don’t be afraid to call a professional. Don’t take on jobs to save money, if you aren’t sure how to fix them. Calling a professional plumber saves you money, the experience and know-how can fix your problem sooner and with less fuss.

To winterize a house that will sit unused during the winter months, you must completely drain all of the pipes. After turning off the main water supply, let all of the water drain from the faucets, toilets, and water heater (turn off the gas). Add a quart of antifreeze to sinks and the tub to prevent water from freezing in the drain trap.

You should drain all of the water out of the tank of your hot water heater at least once every three to six months. Draining all of the water out of the tank helps to prevent sediment build-up at the bottom of the tank. This sediment can cause the tank to bang or to heat less efficiently.

The dryer has a lint trap that must be kept clean. This can prevent various problems, including a fire. See to it that you look at the lint trap and find out if it has tears or holes in it that could cause lint to go inside your pipes. This could lead to clogs or other problems in the future.

Have your pipes in your plumbing system frozen? You can skip the cost of hiring a plumber by using this method. First, open the faucet so steam produced by the thawing process can escape. Begin thawing close to the faucet, and move down the line as each section thaws out. Use a hair dryer or a heat lamp to warm along the pipe. Even though this method consumes quite a bit of time, it is safer than most other heating methods. Furthermore, it requires no cleanup.

Be sure to check that your faucets on the outside of your home are free of leaks as winter approaches. If the faucets have these problems, they will have to be repaired before temperatures reach the freezing point. If your pipes freeze, no matter what they are made of, water pressure may make them crack. Even a small crack is capable of releasing enough water to damage or flood your home.

In conclusion, it is important that you back yourself up with a great base knowledge of plumbing. Ideally, you were able to find this article both informative and interesting. Use this great information and you will find that you will save a lot of money, as opposed to having to hire a professional.

This entry was posted in DIY, Home Appliances, Plumbing, Tips and tagged , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *