Plumbing Does Not Have To Be Hard, Here is Some Advice That Will Make It Seem Easy

Plumbing Does Not Have To Be Hard, Here is Some Advice That Will Make It Seem Easy

Plumbing can be a very personal type of home improvement. It involves particular needs of an individual’s home. This vast world has so many techniques, equipment, and regulations that it can seem a bit confusing as to where you need to begin. These tips can help you make sense of the confusion.

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

Make sure you know where your home’s water shutoff is located. You never know when there might be an emergency involving a broken pipe or damaged connection that requires you to turn off the water right away. In addition, knowing where the shutoff is located is vital before you start any plumbing project, in case anything goes wrong. Continue reading “Plumbing Does Not Have To Be Hard, Here is Some Advice That Will Make It Seem Easy”

Simple Solution To Help You Better Understand Plumbing

Simple Solution To Help You Better Understand Plumbing

When it comes to plumbing, you want to make sure that you are getting the best advice available. Use the tips and tricks provided in this article to ensure that you are getting reliable information to use at home and it will not lead to further, unwanted costs down the road.

Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut off valves near where you are working. This will save a great deal of hardship later on.

Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it. Continue reading “Simple Solution To Help You Better Understand Plumbing”

What You Should Do If You’re In Need Of Plumbing

What You Should Do If You’re In Need Of Plumbing

Did you know that loose pipes might be responsible for the hammering sounds in your plumbing? If this interests you, you might wish to check out all of the other great information in this article. Take a few minutes and learn all you can learn about plumbing today.

If you are paying someone else to do the plumbing in your home be sure that they are licensed in your state to do that work. Some people who have little or no knowledge of plumbing will try to pass themselves off as a pro. So you can see the importance of checking to see if your plumber is licensed. You should also see if you can find positive testimonials about the plumbers work.

Avoid the bursting of pipes due to the change in the temperature. You need to allow the flow of heat to reach under the sinks and into the pipes, you have to keep the cabinet doors of the bathrooms and kitchens open. It is important to keep water running at both hot and cold faucets along with vanities that are in close proximity to exterior walls. Continue reading “What You Should Do If You’re In Need Of Plumbing”